• 2 hours Oklahoma Rig Explodes, Leaving Five Missing
  • 4 hours Lloyd’s Sees No Room For Coal In New Investment Strategy
  • 7 hours Gunmen Kidnap Nigerian Oil Workers In Oil-Rich Delta Area
  • 9 hours Libya’s NOC Restarts Oil Fields
  • 11 hours US Orion To Develop Gas Field In Iraq
  • 3 days U.S. On Track To Unseat Saudi Arabia As No.2 Oil Producer In the World
  • 3 days Senior Interior Dept. Official Says Florida Still On Trump’s Draft Drilling Plan
  • 3 days Schlumberger Optimistic In 2018 For Oilfield Services Businesses
  • 3 days Only 1/3 Of Oil Patch Jobs To Return To Canada After Downturn Ends
  • 3 days Statoil, YPF Finalize Joint Vaca Muerta Development Deal
  • 3 days TransCanada Boasts Long-Term Commitments For Keystone XL
  • 3 days Nigeria Files Suit Against JP Morgan Over Oil Field Sale
  • 4 days Chinese Oil Ships Found Violating UN Sanctions On North Korea
  • 4 days Oil Slick From Iranian Tanker Explosion Is Now The Size Of Paris
  • 4 days Nigeria Approves Petroleum Industry Bill After 17 Long Years
  • 4 days Venezuelan Output Drops To 28-Year Low In 2017
  • 4 days OPEC Revises Up Non-OPEC Production Estimates For 2018
  • 4 days Iraq Ready To Sign Deal With BP For Kirkuk Fields
  • 4 days Kinder Morgan Delays Trans Mountain Launch Again
  • 4 days Shell Inks Another Solar Deal
  • 5 days API Reports Seventh Large Crude Draw In Seven Weeks
  • 5 days Maduro’s Advisors Recommend Selling Petro At Steep 60% Discount
  • 5 days EIA: Shale Oil Output To Rise By 1.8 Million Bpd Through Q1 2019
  • 5 days IEA: Don’t Expect Much Oil From Arctic National Wildlife Refuge Before 2030
  • 5 days Minister Says Norway Must Prepare For Arctic Oil Race With Russia
  • 5 days Eight Years Late—UK Hinkley Point C To Be In Service By 2025
  • 5 days Sunk Iranian Oil Tanker Leave Behind Two Slicks
  • 5 days Saudi Arabia Shuns UBS, BofA As Aramco IPO Coordinators
  • 6 days WCS-WTI Spread Narrows As Exports-By-Rail Pick Up
  • 6 days Norway Grants Record 75 New Offshore Exploration Leases
  • 6 days China’s Growing Appetite For Renewables
  • 6 days Chevron To Resume Drilling In Kurdistan
  • 6 days India Boosts Oil, Gas Resource Estimate Ahead Of Bidding Round
  • 6 days India’s Reliance Boosts Export Refinery Capacity By 30%
  • 6 days Nigeria Among Worst Performers In Electricity Supply
  • 7 days ELN Attacks Another Colombian Pipeline As Ceasefire Ceases
  • 7 days Shell Buys 43.8% Stake In Silicon Ranch Solar
  • 7 days Saudis To Award Nuclear Power Contracts In December
  • 7 days Shell Approves Its First North Sea Oil Project In Six Years
  • 7 days China Unlikely To Maintain Record Oil Product Exports
Alt Text

The Least Compliant Country In The OPEC Deal

Kazakhstan committed to cutting production…

Alt Text

Peak Oil Demand Is A Slow-Motion Train Wreck

Peak oil demand has been…

Alt Text

Soaring Indian Oil Demand Grabs OPEC’s Attention

As Indian oil demand continues…

Omar Mawji

Omar Mawji

Omar Mawji was previously an investment analyst at Katusa Research in Vancouver. He also served as the lead oil & gas analyst for institutional investors…

More Info

How Suncor Has Become The King Of Canadian Oil Sands

Canada Oil Sands

Suncor: King of Canada’s Oil Sands

Canada’s oil sands are the third largest oil deposit in the world behind Saudi Arabia and Venezuela. The largest oil sands producer in Canada, Suncor Energy (SU), has managed to dominate market share in oil sands mining, in-situ, and synthetic crude oil operations.

Suncor began oil sands mining operations with the Millennium Mine in 1967, currently known as Suncor’s Base Operations, with initial production capacity of 294,000 barrels per day. Base Operations now has the highest capacity of any oil sands mine, with 350,000 barrels per day. In 2004, Suncor began in-situ oil sands operations at its Firebag facility, with a capacity of 35,000 barrels per day. Unlike the surface mining of Suncor’s Base Operations, at Firebag Suncor extracts oil from underground through the injection of steam, heating and liquefying the oil, before pumping it back up to the surface. Today, the Firebag in-situ project has 203,000 barrels per day of capacity – the largest in-situ project operating in Canada’s oil sands.

Suncor Consolidating Oil Sands Production

Suncor began its buying spree in the depressed oil environment of September 2015, when the company purchased a 10 percent stake from its joint venture partner at the Fort Hills oil sands mining project. The purchase of Total SA’s (TOT) stake cost Suncor $310 million and gave the company control of 50.8 percent of the Fort Hills mine, with expected working interest capacity of 91,000 barrels per day in 2017.

The Total SA deal was just the beginning for Suncor – the company proceeded to shift its focus from oil sands mining to synthetic crude oil production. Suncor owned a 12 percent non-operating stake in Canada’s largest synthetic crude oil project, Syncrude Canada, with the capacity to produce 350,000 barrels per day of synthetic crude oil. Oil sands oil is extracted in the form of a heavy viscous oil called bitumen. This oil is then blended with a lighter oil or upgraded through facilities similar to Syncrude Canada’s synthetic oil operations; this ensures blended or upgraded bitumen flows smoothly through pipelines.

Most of Canada’s oil sands bitumen production is blended with a light oil, most commonly an imported ultra-light U.S. shale oil called condensate. For every 10 barrels of bitumen, 3 barrels of condensate are required for blending. The blended product is referred to as Western Canadian Select (WCS) oil and it trades at a significant discount to lighter synthetic oil and the U.S. benchmark for light oil referred to as WTI. The fact is that even when blended, WCS is a heavier oil and more difficult for refiners to refine than lighter crudes; thus, lighter crudes like WTI, condensate, and synthetic crude trade at a premium to WCS.

***The lighter the oil, the higher the oil’s API, and the easier it is for refiners to crack into lighter petroleum products like gasoline, diesel, and distillates. Condensate, also known as Pentanes Plus, is used primarily for blending with fuel/oil.***

The alternative to blending heavier oil is to produce synthetic crude oil through the preliminarily refining of heavy oil to a lighter product similar to the U.S. benchmark WTI. The cost to refine heavy oil into synthetic crude oil can be an additional $7-$16 per barrel compared to blending bitumen with light oil, and is one of the reasons why synthetic crude oil often trades at a wide premium to WCS.

(Click to enlarge)

Suncor’s synthetic crude oil costs are relatively low when compared to its other Syncrude Canada partners. As of the first quarter of 2016, Suncor has managed to keep its synthetic crude oil operating costs at $7.10 per barrel greater than its WCS-priced Canadian heavy oil production costs. The additional $7.10 costs to Suncor for the production of synthetic crude oil is much lower than the spread they receive between refining and selling higher priced synthetic crude oil compared to blending heavy oil and selling it at lower WCS prices. Put another way, their cost of production is lower than the synthetic premium shown in the chart above.

(Click to enlarge)

At the end of 2015 and into early 2016, Suncor made a big bet on Syncrude Canada with the purchase of Canadian Oil Sands (COS): Syncrude Canada’s largest partner. The acquisition of Canadian Oil Sands cost Suncor $6.6 billion in March 2016 and meant that Suncor was producing a quarter of all of Canada’s oil sands production.



After closing the purchase of Canadian Oil Sands in March 2016, Suncor bought an additional 5 percent stake in Syncrude Canada from Murphy Oil (MRU) for $937 million, making Suncor the majority owner of Syncrude Canada.

Why Syncrude Canada? Why Now?

Suncor’s purchase of both Canadian Oil Sands and Murphy Oil stakes in Syncrude Canada are the cheapest entry points since upgrades made to Syncrude Canada in 2006.

(Click to enlarge)

Suncor purchased stakes in Syncrude from Canadian Oil Sands and Murphy Oil at a 70 percent discount to the purchase price Sinopec paid for ConocoPhillips’ (COP) 9 percent stake in Syncrude in 2010, even though the current WTI price trades at a 40 percent discount to prices in 2010. Suncor’s plan is to use its operational expertise, the scale of Syncrude operations, and the improved performance of Syncrude Canada under operational partners Imperial Oil (IMO) and Exxon (XOM) to bring down costs over time. Suncor’s cost to produce synthetic crude oil is the lowest of the companies it has acquired, and Suncor has made it clear that it is looking to improve efficiencies from its acquisitions instead of seeking operational ownership.

(Click to enlarge)

While Suncor focuses on its own efficiencies, Imperial Oil and Exxon have greatly improved operational efficiency at Syncrude Canada into 2016. Every year since 2010, operational issues have plagued Syncrude, bringing utilization rates down to 70 percent from over 84 percent. At the time Imperial Oil and Exxon took operational control over Syncrude Canada in 2006, on a 10-year management agreement, Syncrude Canada faced issues with its refining cokers, sulphur processing units, water treaters, and boilers. After 10 years of management, Imperial Oil and Exxon have improved operations and learned from mistakes, which has given the companies a deeper understanding of Syncrude operations and, thus, they are able to handle past issues with more efficiency.

Currently Syncrude operations are running at their highest rates since 2010 and Suncor has reaffirmed that these high utilization rates are expected to continue into the future. Suncor, with its majority ownership, will work with Imperial Oil and Exxon to improve operations and keep utilization rates near their current level.

(Click to enlarge)

With increased utilization of Syncrude facilities, Canada’s conventional oil exports are increasingly being made up of synthetic crude oil. In 2011 synthetic crude oil was the 4th largest conventional oil export from Canada, making up 20 percent of exports. As of the first quarter of 2016, synthetic crude oil became the 2nd largest conventional oil export from Canada, climbing to 26 percent of exports.

(Click to enlarge)

Suncor – The Closest Thing to a Canadian National Oil Company

Suncor has become synonymous with Canada’s oil sands as the company controls almost 30 percent of all oil sands mining and in-situ production capacity either directly or through partnerships. On top of unprocessed oil sands production, Suncor’s acquisition of Canadian Oil Sands and Murphy Oil’s Syncrude share has increased its ownership control of synthetic crude oil operations to over 60 percent of all upgraded oil capacity coming out of Canada’s oil sands.

Suncor has used the 2015/2016 down market in oil prices to strategically consolidate its market share of Canada’s oil sands. With 46 percent of Suncor’s operating cash flows generated from Suncor’s refining operations and the rest generated from upstream exploration and production and oil sands businesses, Suncor’s cash flows are much less volatile relative to oil prices.

While the price of oil fell 48 percent from 2014, Suncor’s operating cash flow fell by only 22 percent. The lower volatility of cash flows and relatively low debt levels gave Suncor the strength it needed to start building market share in Canada’s oil sands. Suncor has become one of the first examples of how large companies with a healthy balance sheet and stable operating cash flow can take advantage of today’s market to gain a larger market share, essentially controlling the 3rd largest oil reserve in the world: Canada’s oil sands.

By Omar Mawji via Geopoliticalmonitor.com

More Top Reads From Oilprice.com:




Back to homepage


Leave a comment
  • Tom Biggs on May 11 2016 said:
    Suncor actually began this spree in 2009 when they bought Petro-Canada.
  • Mari on May 22 2016 said:
    It's a full of information, Great post ! This post helped to know for this topic. Thank you
  • Dave on May 24 2016 said:
    Synthetic crude trades at a premium to heavy crude not because it costs more to make, but because it is worth more to a refiner. Refiners determine the value of the crude based on the products it resulting from processing in their refinery. Synthetic crudes typically have very low sulfur content and very low resid (low value refinery products), which make then valuable to a refiner.
    Also, WCS is only one of the heavy crude blends in Canada. It is a major blend and is typically quoted in the price services. This article implies that all heavy crude is blended with condensate to make WCS. There are two major types of blending. Blending with condensate to make what is called Dilbit, and blending the heavy crude with synthetic crude to make Synbit.
  • Omar on May 31 2016 said:
    Dave: The syncrude process from start to finish involves, mining, extracting, dilution with naphtha, and then refined using syncrude upgrader. Q1 2016 Suncor records operating costs for oil sands to be $24.25 per barrels and Syncrude costs at $31.35 per barrel. The higher costs are worth it for Suncor because they can sell the sweet low sulfur product for a higher prices. Syncrude is easier to refine when compared to WCS. The reason I use WCS is because I can get regular quotes for WCS.

Leave a comment




Oilprice - The No. 1 Source for Oil & Energy News