A City University of Hong Kong research team has discovered an innovative way to boost metal carbon dioxide battery capacity by introducing an unconventional phase nanomaterial as a catalyst, boosting battery energy efficiency up to 83.8%. The metal-carbon dioxide battery is a promising and environmentally friendly technology and the study reveals a novel design of catalysts for the new generation of meta-gas batteries. The study paper has been published in the Proceedings of the National Academy of Sciences.
The metal-carbon dioxide battery can provide durable electricity (high energy density) for electronics, and enable carbon dioxide (CO2) fixation without extra energy consumption from an external circuit to convert CO2 greenhouse gas emissions into value-added products . In particular, the lithium-carbon dioxide battery has high theoretical energy density (1876 Wh kg-1), making it a promising candidate for next-generation high-performance energy conversion and storage technology.
However, metal-CO2 batteries still suffer from sluggish reaction kinetics. This causes large over-potential (i.e., more voltage or energy is required than is theoretical determined to drive the oxidation-reduction reaction that makes the battery work), low energy efficiency, poor reversibility, and limited cycling stability.
Technical hurdles in traditional catalyst modification strategies
Dr. Fan Zhanxi, Assistant Professor in the Department of Chemistry at CityU, and one of the leaders of the study explained, "Researchers commonly consider morphology, size, constituents and distribution of metal-based components in composite cathode catalysts to be the main concerns that lead to differences in battery performance. But we found preparing novel catalysts with unconventional phases to be a feasible and promising strategy to boost the energy efficiency and performance of metal-gas batteries, especially since traditional modification strategies for catalysts have encountered long-term technical hurdles."
Dr. Fan's team accumulated extensive experience and knowledge related to the precise regulation of the crystal phase of metal-based nanomaterials, which enabled them to select suitable elements to construct their unconventional phases and subsequently study the effect of the crystal phase of catalysts on the reaction kinetics of a certain kind of aprotic (i.e., not involving hydrogen ions) metal-gas electrochemistry. "However, this does not mean that this process is easy to realize because it involves strict requirements on the bifunctionality of cathode catalysts in an organic environment," explained Dr Fan.
The team synthesized iridium nanostructures with an unconventional 4H/face-centered cubic (fcc) heterophase by controlling the growth kinetics of Ir on gold (Au) templates. In their experiments, the catalyst with 4H/fcc heterophase demonstrated a lower charge plateau (below 3.61 V) and higher energy efficiency up to 83.8% during cycling in aprotic Li-CO2 batteries than other metal-based catalysts (commonly with charge potential of over 3.8 V and energy efficiency up to 75%).
Outstanding performance of unconventional phase metal nanomaterials
The combination of experiments and theoretical calculations conducted by the team revealed that 4H/fcc Ir nanostructures created through phase engineering are more favorable for the reversible formation of amorphous/low-crystalline discharge products, thereby lowering the overpotential and promoting the cycling stability of electrochemical redox reactions. The unusual phase 4H/fcc Ir nanostructures performed much better than common fcc Ir, and achieved outstanding charge potential and energy efficiency compared to other reported metal-based catalysts used in aprotic Li-CO2 batteries.
"This study reveals the great potential of phase engineering of catalysts in metal-gas electrochemistry. It opens up a new direction to design catalysts for developing sustainable electrochemical energy conversion and storage systems," concluded Dr Fan.
While this research might seem to be at a very basic level, the know how has come up a notch. Metal gas batteries are a field that suggests promise and great potential while the problems of getting something marketable is still quite a ways off. But the effort is likely worth it.
When it comes to a store of energy, be it a fuel or a battery, economics will be the final judge barring a political fiat that bars consumers the ability to choose. One way or another consumers are going to want to know the sunken investment and operating costs for that store of energy and the end cost of getting the job done.
That's why the potential of metal gas is important. Lots of energy by battery standards. Now if the researchers can iron out the difficulties and come up with a competitive production process metal gas could be quite the thing in the future.
For those interested the authors list is quite long and is available at both the press release and the published study paper.
By Brian Westenhaus via New Energy and Fuel
More Top Reads From Oilprice.com:
Brian is the editor of the popular energy technology site New Energy and Fuel. The site’s mission is to inform, stimulate, amuse and abuse the… More
Or, in plain English, they don't work.