Breaking News:

Syrian “Godfather of Oil” for the Regime Killed in Drone Strike

Scientists Report Breakthrough In Disruptive Perovskite Solar Tech

A research team from City University of Hong Kong (CityU) made a breakthrough by developing an innovative multifunctional and non-volatile additive which can improve the efficiency and stability of perovskite solar cells. The improvement comes by modulating perovskite film growth using a simple and effective strategy that has great potential for facilitating the commercialization of PVSCs.

The reporting of the discovery has been published in Nature Photonics. Perovskite solar cells (PVSCs) are a promising alternative to traditional silicon-based solar cells because of their high power-conversion efficiency and low cost. However, one of the major challenges in their development has been achieving long-term stability.

Photo of a 1 cm2 perovskite solar cell with additive. Image Credit: City University of Hong Kong. For more information and images click the press release link.

Professor Alex Jen Kwan-yue, Lee Shau Kee Chair Professor of Materials Science and Director of the Hong Kong Institute for Clean Energy at CityU, who led the study explained, "This type of multifunctional additive can be generally used to make different perovskite compositions for fabricating highly efficient and stable perovskite solar cells. The high-quality perovskite films will enable the upscaling of large-area solar panels."

PVSCs have attracted significant attention due to their impressive solar power conversion efficiency (PCE). Since perovskites can be deposited from solutions onto the fabrication surfaces, PVSCs have the potential to be applied in building-integrated photovoltaics (BIPV), wearable devices, and solar farm applications. However, the efficiency and stability are still affected by the severe energy loss associated with defects embedded at the interfaces and grain boundaries of the perovskites. Therefore, the intrinsic quality of perovskite film plays a critical role in determining the achievable efficiency and stability of PVSCs.

Related: Oil Loses 1% As Fed Temporarily Pauses Rate Hikes

Although many previous research studies have focused on improving the film morphology and quality with volatile additives, these additives tend to escape from the film after annealing, creating a void at the perovskite-substrate interface.

To solve these issues, the CityU researchers developed a simple but effective strategy of modulating the perovskite film growth to enhance the film quality. They found that by adding a multifunctional molecule (4-guanidinobenzoic acid hydrochloride, (GBAC)) to the perovskite precursor, a hydrogen-bond-bridged intermediate phase is formed and modulates the crystallization to achieve high-quality perovskite films with large perovskite crystal grains and coherent grain growth from the bottom to the surface of the film. This molecule can also serve as an effective defect passivation linker (a method to reduce the defect density of perovskite film) in the annealed perovskite film due to its non-volatility, resulting in significantly reduced non-radiative recombination loss and improved film quality.

The test experiments showed that the defect density of perovskite films can be significantly reduced after introducing GBAC. The power conversion efficiency of inverted (p-i-n) perovskite solar cells based on the modified perovskites was boosted to 24.8% (24.5% certified by the Japan Electrical Safety & Environment Technology Laboratories), which is among the highest values reported in the literature. Also, the overall energy loss of the device was reduced to 0.36eV, representing one of the lowest energy losses among the PVSC devices with high power conversion efficiency.

Additionally, the unencapsulated devices exhibit improved thermal stability beyond 1,000 hours under continuous heating at 65 ± 5°C in a nitrogen-filled glovebox while maintaining 98% of the original efficiency.

The team demonstrated the general applicability of this strategy for different perovskite compositions and large-area devices. For example, a larger area device (1 cm2) in the experiment delivered a high PCE of 22.7% with this strategy, indicating excellent potential for fabricating scalable, highly efficient PVSCs.

Professor Jen noted, "This work provides a clear path to achieving optimised perovskite film quality to facilitate the development of highly efficient and stable perovskite solar cells and their upscaling for practical applications."

In the future, the team aims to further extend the molecular structures and optimize the device structure through compositional and interfacial engineering. They will also focus on the fabrication of large-area devices.

Professor Jen is the corresponding author of the research. The co-first authors are Miss Li Fengzhu and Dr Deng Xiang from Professor Jen's research group. Other team members from CityU include Dr Chen Xiankai, Dr Tsang Sai?wing, Dr Yang Zhengbao, Dr Francis Lin and Dr Wu Shengfan.


Perovskite solar cells have been generating news for years now. At the beginning it was lead in the compound and over time that issue has slowly slipped from view. Now the long lasting matter of longevity is still bedeviling the progress.

Those matters are not completely solved. The idea that a solar cell technology can or might lead to toxins on one's roof gives one pause for thought. Then there is the matter of recycling with lead toxins. All that coincides with the manufacturing being done in a nation with a consistent disregard for product safety.

One has high hopes that materials science will get to a great solution and that manufacturers will build good safe recyclable units.

But its going to be a while.

By Brian Westenhaus via

More Top Reads From

Back to homepage

Loading ...

« Previous: Polysilicon Price Surge: A Challenge For Emerging Solar Markets

Next: Solar Silicon Prices Hit Rock Bottom Amid Overproduction »

Brian Westenhaus

Brian is the editor of the popular energy technology site New Energy and Fuel. The site’s mission is to inform, stimulate, amuse and abuse the… More